Paver Cleaning and Sealing in West Palm Beach: What to Know Before You Book
Paver cleaning and sealing in West Palm Beach restores pavers worn down by sun, salt air, and summer rain. Joints lose sand, weeds grow through, and the color fades. Cleaning and sealing are not the same job, and sealing too soon or skipping the sand is the most common mistake. Here is what to know before you book.
What is paver cleaning?
Paver cleaning is a pressure wash that lifts embedded dirt, algae, mold, and old sealer from the paver surface and the joints. The crew uses a surface cleaner at a gentle pressure so the pavers are not chipped or blasted apart, and it pulls weeds and moss out of the joints. A paver driveway or pool deck that has not been cleaned in a year or two is usually dark with algae, and a good cleaning brings the color back.
Why joint sand matters
Joint sand is the polymeric sand swept between pavers. It locks each paver in place, keeps the surface level, and stops weeds and ants from moving in. Cleaning blasts a lot of the old sand out of the joints, so it has to be replaced before anything is sealed. If the joints are left empty, the pavers can shift, and weeds come back through the gaps within weeks.
Sealing is a separate step after cleaning
Sealing is not part of cleaning. It is a separate step that comes after the pavers are cleaned, re-sanded, and fully dry, usually 24 to 48 hours later. The sealer is rolled or sprayed over the clean, dry pavers to lock in the sand, deepen the color, and help the surface resist stains, algae, and salt air. Sealing a dirty or wet paver traps dirt and moisture, and the finish can turn cloudy or peel.
What happens during a paver cleaning and sealing job?
| Step | What happens | Why it matters |
|---|---|---|
| Cleaning | Pressure wash lifts dirt, algae, and old sealer | Gives the sealer a clean surface to bond to |
| Re-sanding | Fresh polymeric sand is swept into the joints | Locks pavers in place and stops weeds |
| Drying | Pavers dry for 24 to 48 hours | Sealer traps moisture if it goes on too soon |
| Sealing | Sealer is rolled or sprayed over clean, dry pavers | Locks in sand, deepens color, and blocks stains |
How long do pavers stay clean after sealing?
A sealed paver surface stays clean and bright for 2 to 3 years, because the sealer keeps stains and algae from soaking in. Salt air, pool splash, and heavy shade shorten that, so waterfront and pool areas need attention sooner. Most West Palm Beach paver driveways need cleaning every 6 to 12 months, and a fresh seal every 2 to 3 years keeps the color and the joints in good shape.
How to get a paver job done right
Get a written quote that lists cleaning, re-sanding, and sealing as separate lines, and ask how long the pavers will dry before the sealer goes on. The crew should protect plants and the pool, and they should tell you when the surface is safe to walk and drive on. If you are comparing services, start with our residential pressure washing page to see what each service covers.
Clean pavers look their best when the rest of the home is cared for too, from the roof down to the glass. If you have a second home or family in the Pacific Northwest, you can see how a professional visit works for window cleaning in Bellingham, WA.
Frequently asked questions
How much does paver cleaning and sealing cost in West Palm Beach?
Paver cleaning runs $200 to $400 in West Palm Beach, and sealing is usually priced separately. The total depends on the size of the area, how much sand is missing, and whether old sealer has to come off first.
Do pavers need to be sealed after cleaning?
Sealing is a separate step, not part of cleaning. Cleaning lifts dirt and algae, and sealing then locks in the joint sand, deepens the color, and helps the surface resist stains and salt air. Most paver jobs need both.
How long do pavers need to dry before sealing?
Pavers need 24 to 48 hours to dry fully after cleaning and re-sanding. Sealing too soon traps moisture under the sealer, which can turn it cloudy or cause it to peel.
What is joint sand, and why does it matter?
Joint sand is the polymeric sand swept between pavers. It locks the pavers in place, stops weeds and ants, and keeps the surface level. Cleaning blasts old sand out, so it must be replaced before sealing.
How often should pavers be cleaned and sealed?
Most West Palm Beach pavers need cleaning every 6 to 12 months and a fresh seal every 2 to 3 years. Salt air, pool splash, and shade make algae grow faster, so waterfront and pool areas need it more often.
